-
High quality products depend on strict production process control
The chemical composition is indeed the DNA of a brick, and the internal structure is composed of corundum (zirconia crystal phase) and zirconia crystals embedded in the silicate glass phase, both of which determine the crystalline phase structure of the brick, which affects its performance. Here ...Read more -
Construction of key parts of oxy-fuel furnaces
(1) Fabrication and installation of steel structure The main function of the steel structure of the oxy-fuel furnace is to support and fix the refractory materials, which is not fundamentally different from the traditional air-fired kiln. It’s just that in the installation and adjustment of...Read more -
Characteristics of Full Oxygen Combustion Glass Kilns
1. Application and Development of Oxygenation Combustion Technology in the Glass Industry The combustion mode of full oxygen combustion (also known as pure oxygen combustion) technology is fuel+oxygen, eliminating the high energy consumption and NOX pollution factors caused by nitrogen in air ass...Read more -
Characteristics of Full Oxygen Combustion Glass Kilns
one Application and Development of Oxygenation Combustion Technology in the Glass Industry The combustion mode of full oxygen combustion (also known as pure oxygen combustion) technology is fuel+oxygen, eliminating the high energy consumption and NOX pollution factors caused by nitrogen in...Read more -
A brief introduction to glass electric melting furnace
The glass tank kiln heated by flame surface has a long history. Although many structural improvements have been made during long-term use, there are still serious drawbacks such as low thermal efficiency, complex kiln structure, large volume, and harsh working environment. Glass is an electrical...Read more -
What are the requirements for refractory materials used in glass kilns?
What are the quality requirements of fused cast AZS blocks for glass furnace ? If a glass furnace wants to reach the designed service life or to be free from contamination of the glass solution, it is necessary to have a comprehensive understanding of the appearance quality and internal quality o...Read more -
Fused zirconium corundum
Fused zirconium corundum Electric fused zirconium corundum is commonly known as white iron brick or fused cast high corundum brick. It is the most important refractory to ensure the normal operation of the glass furnace. At present, the improvement of melting rate, extension of furnace life and r...Read more -
Glass furnace assembly
According to the customer’s size and quality requirements, we do pre assembly.Read more -
[Popular science] Factors of refractory material alteration in glass tank furnace
In the process of glass melting, the interaction between refractories and molten glass at high temperature will cause corrosion damage to refractories and even defects to molten glass. In the tank kiln, the corrosion effect of the batch components on the refractory is much greater than that of t...Read more -
How to inspect the melting kiln in normal operation? How to handle exceptions?
如何对正常运行的熔窑进行巡检？发现异常如何处理？ ① 巡检内容 a、池壁处冷却风量及相关冷却风量是否正常，池壁砖是否有开裂发红； b、下间隙是否有发红透火，烧嘴砖是否烧损透火，尤其下间隙上侧的托铁板是否受到透火烧损： c、各处碹顶保温层及胀缝，各处胸墙及小炉的胀缝是否有发红、冒烟或透火等： d、蓄热室前后墙...Read more -
What are the factors of lattice block in regenerative chamber of glass kiln? ，What does general dredge method have?
玻璃窑蓄热室格子体受堵有哪些因素？一般疏通方法有哪些？ ①蓄热室受堵的主要因素如下 a、蓄热室内格子孔内腔偏小，相对容易受堵； b、原料超细粉的含量过多，配合料的含水率过低，造成配合料在窑内飞散率过大； 油枪燃烧角度偏低，使火焰下飘吹扫料面、造成配合料在窑内过多飞散并随废气带入蓄热室内： d、原料的含硫成...Read more -
Brief introduction of electrofusion refractory
There are many kinds of refractory materials. According to their appearance classification, refractory materials can be divided into refractory bricks (products with certain shape) and amorphous refractory materials (hereinafter referred to as bulk materials). Among them, refractory bricks are di...Read more